LG DU-27FB34C - Manual (Page 45)

Installer Menu
Detailed Descriptions of Installer Menu Items
0-I. INSTALLER SEQUENCE
Gives access to Installer Menu depending on
the code selected.
0 = 9876 1 = 4321
2 = 1478 3 = 3698
1-I. POWER MANAGE (Power Management)
Determines hours of no activity before automatic
shutoff. The POWER MANAGE function is for
saving energy. When set to 0, Power Manage
is OFF.
Settings range from 0 - 7, with 1 - 7 representing
the hours that the TV will remain on, unless there
has been activity from either the control panel or
remote control.
*M.P.I. Multiple Protocol Input: LG protocol for
remote control of TV through RJ11 (M.P.I.) jack
on TV connections panel.
2-I. AC ON (AC Power Switchable)
Allows the TV to turn ON just by applying AC
power. Pressing the ON button is not necessary.
This is desirable when the TV is plugged into a
cablebox or a power outlet controlled by a
wallswitch. UseADJ to select 0 or 1, where 0 is
the default is OFF, and1 is ON.
NOTE: When set to 1 (ON), the TV does notrespond
to ON/OFF commands from either the remoteorthe
control panel, and the SLEEP TIMER is also not
functional.
3-I. BAND/AFC (Band/Automatic
Frequency Control)
There are 8 possible settings for this option:
0 = Broadcast Fixed 4 = Broadcast AFC
5 = CATV Fixed 1 = CATV AFC
6 = HRC Fixed 2 = HRC AFC
7 = ICC Fixed 3 = ICC AFC
Channels are accessed faster when fixed modes.
are used.The AFC (search modes) should only be
used when some channels are not on nominal
frequencies.
NOTE:
BAND is automatically set by AUTOPROGRAM .
If some channels were not found by AUTO-
PROGRAM, select the appropriate AFC setting
here and add the channels using the ADD/DEL
option in the Setup Menu.
Page 45