LG UX390 - Manual (Page 53)

Call from SpeedTalk SM Contact List (Barge)
1. From Standby mode, press and hold ST key to
access your ST Contact List.
2. Use to highlight the ST Contact entry you
wish to call.
3. Press and hold the ST key.
● Sender hears ST talk tone and can begin
speaking.
● Receiver has the options to answer or ignore
using
.
4. Press and hold ST Key to send alert.
5. Release ST Key after speaking.
● Receiver hears incoming barge tone.
● Receiver hears sender’s voice followed by the
floor available tone.
● Sender’s device displays connected screen.
6. Press and hold ST key to speak.
7. Release ST key to listen.
Call from SpeedTalk SM Contact List (Alert)
1. From Standby mode press and hold the ST key to
access your ST Contact List.
2. Use to highlight the ST Contact entry you
wish to alert.
3. Press Left Soft Key Alert .
● Receiver hears alerting tone and receives alert
message.
4. If receiver accepts the alert and places a ST call to
the sender,
● Sender hears incoming barge tone.
● Sender hears receiver’s voice followed by the
floor available tone.
● Receiver’s device displays connected screen.
5. Press and hold ST key to speak.
6. Release ST key to listen.
53
SpeedTalk
SM
UX390_Eng.qxd 7/7/06 6:01 PM Page 53