LG UX390 - Manual (Page 54)

Call from SpeedTalk SM Contact List
(Group)
Allows you to make a multiparty call with all or
selected members of a ST Group.
1. Press and hold ST key to access ST Contacts list.
2. Use to highlight the ST Group.
3. To make a ST Group call to all members in the
Group,
- Press and hold ST Key.
To make a ST Group call to selected members of
the Group,
- Use to highlight the ST group and Press
.
- Select the Contacts you wish to include in ST
group call.
● Sender hears ST talk tone and can begin
speaking.
4. Release ST key.
● All members of Group hear incoming barge
tone.
● All members of Group hear sender’s voice
followed by the floor available tone.
● Sender’s device displays connected screen.
Call from Keypad (Barge)
1. From Idle Screen, enter the number.
2. Press and hold ST Key.
● Sender hears ST talk tone and can begin
speaking.
● If the phone number is in the ST contact list,
screen shows the Contact name.
3. Release ST key.
● Receiver hears incoming barge tone.
● Receiver hears sender’s voice followed by the
floor available tone.
● Sender’s device displays connected screen.
SpeedTalk SM
54
SpeedTalk
SM
Note
A group call is only a Barge and a user cannot alert a
group.
UX390_Eng.qxd 7/7/06 6:01 PM Page 54