Location requirements – LG LW8012ERJ User Manual
Page 11
A
B
C
D
E
F
G
H
I
A. Top channel
B. Foam seal
C. Side brackets (2)
D.Window lock bracket
E.
”
screws (3)
F.
”
screws (9)
G. Side curtains (2)
H.Side curtain frames (2)
I. Remote control
Parts supplied:
Check that all parts are included in parts package.
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.
Tools needed
Phillips head screwdriver
Flat-blade screwdriver
Scissors
Level
Socket wrench and sockets
Tape measure
Cordless drill and 1/8” bit
Pencil
Pliers
Adjustable wrench
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
The location should provide:
5000-8000 BTU:Grounded electrical outlet within 6 ft (183 cm)
of where the power cord exits the air conditioner.
NOTE: Do not use an extension cord.
NOTE: Do not use an adapter plug.
Free movement of air in room to be cooled.
A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
Adequate wall support for weight of air conditioner. Air
conditioner weighs 44 lbs to 70 lbs (20.0 kg to 31.8 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
Location Requirements
A
A. Cabinet louvers