LG ST600 - Manual (Page 28)

Operating 28
Oper
ating
4
Playing a file media from a
network server
This unit can play video, audio and photo files
located in a PC or a DLNA server through your
home network.
1. Check the network connection and settings
(page 16).
2. Press HOME (n).
3. Select [Movie], [Photo] or [Music] using W/S,
and press Center button.
4. Select a DLNA media server or a share folder
on your PC on the list using W/S, and press
Center button.
If you want to rescan available media server,
press the green (G) colored button.
5. Select a file using W/S/A/D, and press
Center button to play the file.
y The file requirements are described on page
8.
y The thumbnail of the unplayable files can
be displayed, but those cannot be played
on this unit.
y The subtitle file name and video file name
have to be the same and located at the
same folder.
y The playback and operating quality may be
affected by your home network condition.
y You may experience connection problems
depending on your server’s environment.
,
Note
Entering a network user ID and the
password
Depending on your PC’s environment, you may
need to enter a network user ID and the password
for accessing a shared folder.
1. The keyboard menu appears automatically if the
network user ID and the password are required.
2. Use W/S/A/D to select a character then
press Center button to confirm your selection
on the virtual keyboard.
To enter a letter with an accent mark, press m
(MENU) to display the extended character set.
[Cancel] – Clear all entered characters.
[Space] – Inserts a space at the cursor position.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters or
symbols.
3. When you finish entering the network user ID
and password, select [OK] using W/S/A/D
and press Center button to access the folder.
The network user ID and password will be
remembered after accessing the folder for your
convenience. If you do not want the network user
ID and password to be remembered, press red (R)
colored button to un-tick the [Remember] check
box before accessing the folder.