LG ST600 - Manual (Page 50)

Appendix 50
Appendix
6
Audio Output Specifications
Jack/Setting
Source
Digital Output (DIGITAL AUDIO OUT) * 4
PCM Stereo DTS Re-Encode * 3 * 5 Primary Pass-Thru
Dolby Digital PCM 2ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch DTS Dolby Digital
DTS PCM 2ch DTS DTS
Linear PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 5.1ch PCM 2ch DTS PCM 2ch
Linear PCM 7.1ch PCM 2ch DTS PCM 2ch
Jack/Setting
Source
HDMI OUT
PCM Stereo DTS Re-Encode * 3 * 5 Primary Pass-Thru * 1 * 2 * 3
Dolby Digital PCM 2ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch DTS Dolby Digital Plus
DTS PCM 2ch DTS DTS
Linear PCM 2ch PCM 2ch DTS Linear PCM 2ch
Linear PCM 5.1ch PCM 2ch DTS Linear PCM 5.1ch
Linear PCM 7.1ch PCM 2ch DTS Linear PCM 7.1ch
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] or [HDMI] option is set to [Primary Pass-
Thru]. (Except LPCM Codec: the output always
include interactive and secondary audio.)
*2 This unit automatically selects the HDMI audio
according to the decoding capability of the
connected HDMI device even though [HDMI]
option is set to [Primary Pass-Thru].
*3 The [Primary Pass-Thru] setting of the [HDMI]
option and [DTS Re-Encode] setting of the
[Digital Output] option cannot be set together.
If you set them together, the [HDMI] or
[Digital Output] option is set to [PCM Stereo]
automatically.
*4 On the [Digital Output] audio output, the
sampling frequency of DIGITAL AUDIO OUT is
limited to 96 kHz.
*5 If the [HDMI] or [Digital Output] option is set to
[DTS re-encode], the audio output is limited to
48 kHz and 5.1Ch.
y If [HDMI] option is set to [Digital Output] option
is set to [Primary Pass-Thru] while playback Dolby
Digital Plus or DIGITAL AUDIO OUT is limited to
“PCM 2ch”.
y If the HDMI OUT jack is connected to your
TV with High Speed HDMI™ Cable and Dolby
Digital Plus is outputted from HDMI OUT jack,
DIGITAL AUDIO OUT jack is limited to “PCM 2ch”
(When the HDMI and DIGITAL AUDIO OUT are
connected simultaneously).
y The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file.
y You must select a digital audio output and
a maximum sampling frequency that your
Amplifier (or AV receiver) accepts using [Digital
Output], [HDMI] and [Sampling Freq.] options on
the [Setup] menu (see page 24).
y If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
y Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.