LG LP1414SHR - Manual (Page 22)

When you use heating function, draining water is needed. For cooling only function, you do not need
to install this part.
INDOOR DRAINAGE
1.Remove the water plug firstly on the back of the product.
2. Install end point of the drain pipe to the unit, and put the other end of the pipe into a bucket.
(Bigger than 28oz)
CAUTION
22
Push Here
before Rotation
the drain cover
I N S T A L L A T I O N I N S T R U C T I O N S
When you use the heating function. It is highly recommended to use indoor drainage because outdoor drainage
can cause some problems. When the outside temperature is below 32℉(0℃), the drain pipe will be frozen if
using outside drainage. In that case, you have to use indoor drainage.
If you want to use outdoor drainage, keep an outlet of water far away from outdoor window to prevent stain of
drained water.
When the relative humidity is 50%, it will generate 28oz water per hour in heating mode.
Please pay attention to selete proper bucket, otherwise the water will be over flowed on the floor.
HEATING DRAINAGE