LG PF85U - Manual (Page 105)

105 CONNECTING DEVICES
HDMI to DVI Connection
Using an HDMI to DVI cable, connect
the projector's HDMI IN port to the DVI
OUT port.
To output audio, use an audio cable for
connection.
Press the
INPUT button on the remote
control to select HDMI. You can connect
with any HDMI input port.
DVI OUT AUDIO OUT
NOTE
y It is recommended to use an HDMI
connection for the best image
quality.
y Depending on the graphics card,
DOS mode video may not work if a
HDMI to DVI Cable is in use.
y In PC mode, there may be noise
associated with the resolution,
vertical pattern, contrast, or
brightness. If noise is present,
change the PC output to another
resolution, change the refresh
rate to another rate or adjust the
brightness and contrast on the
PICTURE menu until the picture is
clear.
y The synchronization input form for
Horizontal and Vertical frequencies
is separate.
y Depending on the graphics card,
some resolution settings may not
allow the image to be positioned on
the screen properly.
y If you are using DVI out from a PC,
you have to connect analog audio
separately.
y When using the HDMI/DVI cable,
Single link only is supported.
* Optional
Extras
(Audio)
* Optional
Extras
(Video)