Tag on, What is tag on, To start tag on for the first time – LG PF85U User Manual

Page 46

Advertising
background image

46

ENTERTAINMENT

Tag On

What is Tag On?

Tag On is a data transmission technology
that can be used on smartphones with
NFC (Near Field Communication). Simply
by tapping your smartphone to a Tag On
sticker, you can share content between
your smartphone and projector.

y

To connect your smartphone to the
projector using Tag On, they must be
connected on the same Wi-Fi network
or Miracast™/Intel’s WiDi of the smart
projector is set to On.

NOTE

y

Do not attach the sticker to a metal
part of the projector. Otherwise, your
smartphone cannot recognize the
Tag On sticker.

y

Do not crumple or fold the Tag On
sticker. Otherwise, the Tag On is not
recognized.

y

To purchase a Tag On sticker, please
contact the LG Electronics Service
Centre.

y

This function is supported only on a
smartphone with Android 4.0 (ICS) or
later.

To Start Tag On For the

First Time

To connect your smartphone to the
projector using NFC, install the Tag On
app on the smartphone and complete the
authentication process.

1

Make sure that the smart projector

is on the same network as your

smartphone. If Wi-Fi cannot be
enabled, go to

SMART

HOME

ⰶᲳ

ㄮᗺ

ⱞⳮ

Ẳⱞ⩛

/

ხ㢢☎⳿

?

SettingsNETWORK

Miracast™/Intel’s WiDi and set to

On.

2

Enable the smartphone's NFC

function and set to

Read/Write and

P2P Mode. For more information on

enabling NFC and setting the mode,

refer to the owner's manual of your

smartphone.

3

Tap your smartphone to a Tag On

sticker. Make sure to follow the

instructions on the smartphone

screen and install the Tag On app

and LG TV Remote app.

4

Tap the smartphone to the Tag On

sticker again.

5

Enter the pairing key displayed on the

smart projector into the smartphone.

When two or more projectors are

detected, the pairing key is displayed

only after the projector you want to

connect to is selected in the device

list.

6

When the connection is made

properly, you can use Tag On.

y

The information of the connected
projector is saved in the Tag On
sticker. You can change or reset the
information in the Settings menu of the
smartphone Tag On app.

Advertising