ArtDio IPS-2101h - Manual (Page 11)

IPS-2101h User Manual
11
5.3 PPPoE Settings
IPS-2101h can not use the Status Button to configure the PPPoE network. Please configure
your IPS-2101h with a Static IP (*note) first (refer to 5.1), then use web browser connect to
IPS-2101h web configuration page to configure the PPPoE settings.
<Note>：In most cases, if your PC has IP address 192.168.1.5, your IPS-2101h can has IP
address between 192.168.1.2 to 192.168.1.254 (the first three digits are the same). Please
make sure there is no IP address conflicted.
You can check the availability by using the “ping” command before you assign it to your
IPS-2101h. For example, if you want to check the availability of the IP address
“192.168.1.101”, go to DOS mode and type “ping 192.168.1.101”. If the result is “Request
time out”, then this IP address has not been used and is available for you to assign it to your
IPS-2101h.