Hardware installation, 1 connection with an ip sharing device or a router, Ips-2101h user manual – ArtDio IPS-2101h User Manual
Page 8: Figure 1-2, Adsl modem
IPS-2101h User Manual
8
4. Hardware Installation
The IPS-2101h configured below already has the VoIP account registered on it. If you do not
have an account or are unable to register it, please contact to your VoIP service provider.
4.1
Connection with an IP Sharing Device or a Router
Deploy this connection when you have an IP sharing device with only one LAN port.
Installation: Plug one end of the RJ-45 cable to one of the LAN port on the IPS-2101h, and
plug another end to one of the LAN port of your router. Another LAN port is available for you to
connect to another Internet device or to your PC. Once the Indicator on the IPS-2101h
becomes green, the hardware installation is completed.
W
AN
LA
N
1
2
3
4
Ethernet
ADSL Modem
Ethernet
Ethernet
Phone Cable
Phone Cable
PSTN
AC Adapter
Figure 1-2