Alpine KCA-420i - Manual (Page 11)

10
-EN
Controling from the IVA-D901 model
1
Press 7 (Page 1/3) twice.
The Function Guide display changes.
2
Press 3 (DISC3).
The album search mode is selected.
3
Press LIST/INPUT.
The song list screen is displayed.
4
Press 6 (NEXT -).
The album name is displayed.
5
Turn the Rotary encoder to select desired
album, then press the Rotary encoder.
All songs of the selected album will be played back
repeatedly.
Controling from the IVA-D300 model
1
Touch [P1/3] on the function guide to change
to [P3/3].
The disc number is displayed.
2
Touch [DISC 3].
The album search mode is selected.
3
Touch [P3/3] to change [P1/3].
The function guide changes.
4
Touch [ ] on the function guide.
The list screen of the song is displayed.
5
Touch [ ] of any song.
The album search mode is entered, then the album
list screen is displayed.
-
6
Touch [-] of the desired album name.
All songs of the selected album will be played back
repeatedly.
Searching by song name
If a song is selected using the playlist/artist/album search
mode, new song searches will only display songs from the
current playlist/artist/album. To search all songs in the iPod,
select the “iPod name” in the playlist search mode, and then
perform the search.
• When the IVA-D901/IVA-D300 models are connected, a
search cannot be performed by the song name.
• If the “iPod’s name” contains characters not supported by
the head unit’s display, “NO SUPPORT” or “NO SUPRT”
may be displayed for the “iPod’s name.”
Controling from the CDA-9835/CDA-9833/
CDA-9831/CDA-9830/CDA-9827/CDA-9826/CDA-
9825/CDA-9820XM models
1
Enter the folder search mode by pressing
(SEARCH).
The song name is displayed.
File search mode ↔ Folder search mode
2
Within 10 seconds, select the song name by
turning the Rotary encoder, then press the
Rotary encoder.
The selected song will be played back.
Controling from the CVA-1004 model
1
When the monitor is open, press and hold the
Rotary encoder for at least 2 seconds
during playback.
The unit switches to file/folder search mode.
2
Press and hold -/J for at least 2 seconds to
select folder search.
The song name is displayed.
3
Press g or f to select the desired song
name.
4
Press the Rotary encoder.
The selected song will be played back.
Quick Search
You can search for songs.
• If there are more than 255 songs, they can be played back,
but cannot be correctly displayed.
• When the IVA-D300/IVA-D901/CVA-1004 models are
connected, the quick search function cannot be used.
• The Quick search in the iPod mode takes more time than
the normal Quick search.
Controling from the CDA-9835/CDA-9833/
CDA-9831/CDA-9830/CDA-9827/CDA-9826/CDA-
9825/CDA-9820XM models
1
Press and hold SEARCH (SEARCH/QS)
for at least 2 seconds to activate Quick
Search mode.
2
Turn the Rotary encoder within 10 seconds
to select a desired song.
The selected song is played back immediately.