Alpine KCA-420i - Manual (Page 7)

6
-EN
Operation
By using this adapter, an iPod or iPod mini is controled from
an Alpine Ai-NET head unit. The following table shows
which head units can be used for this purpose.
For operation using an Alpine Ai-NET head unit sold as
of January 2005, refer to the head unit’s Owner’s
Manual.
All of the iPod’s buttons are disabled when connected to
this adapter. Perform the operation from the head unit.
Operation of the iPod from the Ai-NET head units shown in
the table above, closely follows the MP3 compatible CD
changer operation. For details, refer to the Owner’s Manual
of the head unit.
For each function, refer to the iPod’s documentation.
Turning Power On and Off
1
The iPod power turns on as soon as it is
connected to this adapter.
As soon as the iPod is connected, power is
automatically turned on as long as the vehicle’s
ignition is ON or in ACC mode. The head unit’s
power does not have to be on.
The iPod’s power can be turned OFF after
removing the iPod from the adapter. When the iPod
is left connected to the adapter, power is
automatically turned off when the vehicle’s ignition
key is turned OFF. (The iPod is paused and goes
into sleep mode about 2 minutes later.)
• While the iPod is connected to the adapter, the power
cannot be turned on or off from the iPod.
• “OK to disconnect” is shown in the iPod’s display while it
is connected to the adapter.
• While connected to the adapter, the iPod is charged as long
as the vehicle’s ignition key is turned to ACC or ON.
(Ai-NET compatible head unit sold as of January 2004)
CDA-9825
CDA-9820XM
IVA-D300
IVA-D901
CVA-1004
CDA-9835
CDA-9833
CDA-9831
CDA-9830
CDA-9827
CDA-9826
CD Head Unit
Audio/Visual
Head Unit
CD Head Unit
Recalling the iPod™ mode
• The iPod mode is displayed in the same way as the CD
changer mode.
• If using the iPod with a changer, the Versatile Link
Terminal (KCA-410C) must be used. In this case, press
BAND to select the changer mode applicable to the iPod.
Controling from the CDA-9835/CDA-9833/
CDA-9831/CDA-9830/CDA-9827/CDA-9826/CDA-
9825/CDA-9820XM/CVA-1004 models
1
Press SOURCE/POWER or SOURCE/PWR
to switch to the CD changer mode.
The iPod is controllable from the head unit in the
CD changer mode.
Controling from the IVA-D901 model
1
Press SOURCE/POWER to display the main
menu.
2
Turn the Rotary encoder to select “CD
CHG,” then press the Rotary encoder.
The display changes to the CD changer mode
screen, then the iPod can be controled.
Controling from the IVA-D300 model
1
Touch [SRC] on the main source screen.
The source selection screen is displayed.
2
Touch [CD CHG].
The display changes to the CD changer mode
screen, then the iPod can be controled.
Adjusting Volume
1
Turn the Rotary encoder until the desired
sound is obtained.