Abit AW9D-MAX - Manual (Page 46)

- Control Temperature High/Low
These items set the high and low temperature limit that you want to do the fan speed control.
- DC Fan Voltage High/Low
These items set the high and low voltage limit that you want to provide the fan with.
※ The value of high limit must be set above the one of low limit.
3rd FanEQ Group
Click <Enter> key to enter its submenu (3rd FanEQ Group):
µGuru Utility V1.00C
ABIT EQ
3rd FanEQ Group
OTES1 FanEQ Control Enabled Item Help ►►►
-Reference Temperature SYS Temperature
-Control Temperature High 40
°C/104°F
-Control Temperature Low 30
°C/86°F
-DC Fan Voltage High 12.0 V
-DC Fan Voltage Low 8.0 V
OTES2 FanEQ Control Disabled
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
OTES1~OTES2 FanEQ Control
When set to [Enabled], these items control the OTES1~OTES2 fan speed by the following
setting combinations.
- Reference Temperature
This item selects the reference point for taking temperature among the available options of CPU,
SYS, and PWM Temperature, but there is only one “CPU Temperature” item to choose for the
“CPU FanEQ Control”.
- Control Temperature High/Low
These items set the high and low temperature limit that you want to do the fan speed control.
- DC Fan Voltage High/Low
These items set the high and low voltage limit that you want to provide the fan with.
※ The value of high limit must be set above the one of low limit.
3-10 AW9D-MAX, AW9D