ATI Technologies THEATER 550 - Manual (Page 8)

3
CHAPTER 2:
Installing Hardware
This chapter will guide you through the physical installation of your
THEATER™ 550 PRO TV tuner card.
Quick Installation
Experienced users and system administrators can follow these brief
instructions for installing the THEATER™ 550 PRO TV tuner card in the
shortest possible time.
To perform a quick installation
1 Uninstall the drivers and software for any previous versions of the
product if you have not already done so.
2 Shut down and disconnect your computer system.
3 Remove any previously installed product.
4 Install your new THEATER™ 550 PRO TV tuner card.
5 Reassemble and connect your computer system.
6 Install the THEATER™ 550 PRO TV tuner card drivers and
configuration software from the ATI Installation CD-ROM by doing
one of the following:
• Run through the automatic SETUP utility; or
• Start > Run > X:\SETUP.EXE (where X is the drive letter of
your CD-ROM drive).
THEATER 550.book Page 3 Friday, January 21, 2005 9:31 AM