Search position memory, Changing the display, Information – Alpine Bluetooth CD Receiver CDE-136BT User Manual

Page 35: In case of difficulty, Basic, Radio, Search position memory changing the display, Basic radio cd

Advertising
background image

35

-EN

Search Position Memory

During playback, you can quickly return to the last-selected hierarchy
level in the search mode.

Press

.

The hierarchy you selected last in the search mode is displayed.

Changing the Display

Press VIEW

k.

* TAG information

If there is no text information, nothing will be displayed.

Notes

• Only alphanumeric characters can be displayed.
• The maximum number of characters is 128 (128 byte).
• Some characters may not be correctly displayed.

In Case of Difficulty

If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.

No function or display.
• Vehicle’s ignition is off.

– If connected following instructions, the unit will not operate with

the vehicle’s ignition off.

• Improper power lead (Red) and battery lead (Yellow) connections.

– Check power lead and battery lead connections.

• Blown fuse.

– Check the fuse of the unit; replace with the proper value if

necessary.

• Internal micro-computer malfunctioned due to interference noise

etc.
– Press the RESET switch with a ballpoint pen or other pointed

article.

Unable to receive stations.
• No antenna or open connection in cable.

– Make sure the antenna is properly connected;

replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.
• You are in a weak signal area.

– Make sure the tuner is in the DX mode.

• If the area you are in is a primary signal area, the antenna may not be

grounded and connected properly.
– Check your antenna connections; make sure the antenna is

properly grounded at its mounting location.

• The antenna may not be the proper length.

– Make sure the antenna is fully extended; if broken, replace the

antenna with a new one.

Broadcast is noisy.
• The antenna is not the proper length.

– Extend the antenna fully; replace it if it is broken.

• The antenna is poorly grounded.

– Make sure the antenna is grounded properly at its mounting

location.

CD Player not functioning.
• Out of operating temperature range +50°C (+120°F) for CD.

– Allow the vehicle’s interior (or trunk) temperature to cool.

CD playback sound is wavering.
• Moisture condensation in the CD Module.

– Allow enough time for the condensation to evaporate (about

1 hour).

CD insertion not possible.
• A CD is already in the CD player.

– Eject the CD and remove it.

*

*

*

*

Station Name

Elapsed Time

Clock

Song Title

Album Name

Artist Name

Elapsed Time

Information

Basic

Radio

CD

Advertising