Actiontec electronic 1.5 Telephone - Manual (Page 68)

CounterPath eyeBeam 1.5
65
Appendix E: Alternative Ways of Running eyeBeam
E.1 From a Hyperlink
You can attach a hyperlink to a phone number or SIP address that, when clicked, starts eyeBeam and dials the
number. Attach a hyperlink with this format:
<a href="sip:<address or number>">dial <address or number></a>
For example:
<a href="sip:[email protected]">dial [email protected]</a>
E.2 From the Command Line
You can start eyeBeam from a DOS prompt. You may need to add eyeBeam.exe to the PATH. Then type:
eyebeam.exe
To start eyeBeam from a DOS prompt and immediately dial a number, type:
eyebeam.exe -dial=sip:<number>