ASA Electronics LCM1511WTV - Manual (Page 11)

4. Feature Functions
4-1 No Signal Detection
The monitor will detect signal input automatically. If the signal
source
is OFF or removed, there is a“ “ icon that will appear and
blink
on the upper right corner of the screen that means “No
Signal Input”.
The system will go to power saving mode when there is no signal
input for 1 minute.
4-2 Auto Memory Function
All of the functions adjustments, will be saved automatically. If
you want to change back to the default setting, please use
in the OSD menu to reset everything back to the factory
setting.
4-3 PC VGA Multi-Sync Mode
All available modes are listed below:
Display
Mode Resolution H. Frequency
(KHz) V. Frequency
(Hz) Dot Clock
(MHz)
1 350 640 x 350 @ 85 37.861 85.098 31.5
2 400 640 x 400 @ 85 37.861 85.08 31.5
3 Text 720 x 400 @ 70 31.5 70 28
4 720 x 400 @ 85 37.927 85.039 35.5
5 VGA 640 x 480 @ 60 31.469 59.94 25.175
6 640 x 480 @ 73 37.861 72.809 31.5
7 640 x 480 @ 75 37.5 75 31.5
8 640 x 480 @ 85 43.269 85.008 36
9 SVGA 800 x 600 @ 56 35.156 56.25 36
10 800 x 600 @ 60 37.879 60.317 40
11 800 x 600 @ 72 48.077 72 50
12 800 x 600 @ 75 46.875 75 49.5
13 800 x 600 @ 85 53.674 85.061 56.25
14 XGA 1024 x 768 @ 60 48.363 60.004 65
15 1024 x 768 @ 70 56.476 70.069 75
16 1024 x 768 @ 75 60.023 75.029 78.75
17 1024 x 768 @ 85 68.677 84.997 94.5
NOTE: 15.1” Panel resolution is up to XGA.