Display, Programme progress display – AEG LAVAMAT 12820 User Manual

Page 15

Advertising
background image

Warning! The programme selector dial must be turned first to RESET

O” and then to the DRAIN programme.

If the water is not emptied out, the machine automatically empties
itself after 18 hours.
The RINSE HOLD option cannot be selected for the automatic WASHING &
DRYING programme.

Display

The display shows the following information:

Duration of the selected programme (in minutes), calculated auto-

matically on the basis of the maximum recommended load for each type
of fabric.

Selected drying time (max. 130 minutes for cotton, 100 minutes for

synthetics).

After the programme has started, the time remaining is updated every
minute.

• When the programme has finished, a steadily lit zero is displayed.

Delayed start, (19 hours max.) programmed using the special button

. The countdown is updated every hour.

Alarm code indicating a fault in the machine operation (see page 37).

Programme progress display

By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the pilot light

(END) comes on.

When the programme has finished, if the light

(OVERDOSAGE)

comes on, it indicates that too much detergent has been used.

15

Description of the appliance

PREWASH
WASH
RINSES
EXTRA

RINSE
SPIN

DRYING

OVER-

DOSAGE

END

132993360 gb.qxd 10/25/02 9:26 AM Pagina 15 (Nero/Process Black pellicola)

Advertising