American DJ Sonic Beam II - Manual

User Instructions
American DJ
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
Introduction:
Congratulations and thank you for purchasing the Sonic Beam
II TM from American DJ. The new Sonic Beam II TM is part of
American DJs continuing pursuit for creating high quality afford-
able intelligent fixtures. The Sonic Beam II TM features a bright
250 watt lamp. A high quality dichroic gobo/color wheel brings
out several brilliant colors. The Sonic Beam II TM can run as a
stand alone fixture, in master/slave mode, or can run via DMX
512 protocol.
Customer Support:
American DJ
®
provides a toll free customer support line, to pro-
vide set up help and to answer any question should you encoun-
ter problems during your set up or initial operation. You may also
visit us on the web at www.americandj.com for any comments or
suggestions.
Service Hours are Monday through Friday 10:00 a.m. to 5:00 p.m.
Pacific Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: [email protected]
Warning! To prevent or reduce the risk of electrical shock or fire,
do not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do
not attempt any repairs yourself, doing so will void your manufac-
tures warranty. In the unlikely event your unit may require service
please contact your nearest American DJ dealer.
HALOGEN LAMP WARNING!
This fixture is fitted with a halogen lamp which is highly susceptible
to damage if improperly handled. Never touch lamp with your bare
fingers as the oil from your hands will shorten lamp life. Also, never
move the fixture until the lamp has had ample time to cool. Remember,
lamps are not covered under warranty conditions.
Sonic Beam II™ Introduction
© American DJ Supply ® - www.americandj.com - Sonic Beam II™ Instruction Manual Page 2
DMX-512