Hotkey port selection, Port selection, Auto scanning – ATEN CS9134 User Manual
Page 30: Port selection: auto scanning
CS9134 / CS9138 User Manual
18
Hotkey Port Selection
Port Selection:
To select a port with the hotkey method, do the following:
1. Press [Ctrl] [Shift] [Alt] to invoke the hotkey function.
2. Key in the Port ID number (see page 19), then press [Enter].
Auto Scanning:
To invoke auto scanning with the hotkey method, do the following:
1. Press [Ctrl] [Shift] [Alt] to invoke the hotkey function.
2. Key in 0 (zero), then press [Enter].
To exit scan mode, press the [Spacebar]. Scan mode stops and the KVM
focus stays on the port that had the focus when scan mode stopped.
Note: 1. Press the keys in sequence - one key at a time. First [Ctrl], then
[Shift], then [Alt].
2. After invoking the hotkey function with the [Ctrl] [Shift] [Alt]
combination, you must key in the Port ID and press [Enter] within 1
second for each keypress.
OSD
OSD (On Screen Display), provides a menu driven interface to handle the
computer switching procedure. OSD operation is discussed in detail beginning
on page 21.
cs91348.book Page 18 Thursday, May 3, 2007 2:28 PM