ATEN CS9134 - Manual (Page 33)

21
Chapter 4
OSD Operation
OSD Overview
The On Screen Display (OSD) provides a menu driven interface to handle all
computer control and switching procedures. Although Hotkey switching still
works, using OSD is a great deal more convenient - especially in large,
cascaded installations where it is difficult to keep track of which port a
particular computer is attached to.
All operations start from the OSD Main Menu. To pop up the Main Menu, tap
either Ctrl key twice.
Note: 1. The keys must be on the same side (both left, or both right).
2. You can optionally change the Hotkey to the Scroll Lock key (see
OSD ACTIVATING HOTKEY, page 26), in which case you would tap
[Scroll Lock] twice.
When you invoke the OSD, a screen similar to the one below appears:
OSD always starts in List view, with the highlight bar at the same position it
was in the last time it was closed.
The next two sections explain how to navigate using the OSD and OSD Hotkey
methods.
cs91348.book Page 21 Thursday, May 3, 2007 2:28 PM