Hardware setup, Before you begin, Stacking and rack mounting – ATEN CS9134 User Manual

Page 19: Stacking, Before you begin stacking and rack mounting, Chapter 2, hardware setup, Chapter 2

Advertising
background image

7

Chapter 2

Hardware Setup

Before you Begin

Stacking and Rack Mounting

Stacking

CS9134 / CS9138 switches can be stacked one on top of the other using the
stacking brackets that come already attached to the unit. Line up the four
bottom brackets of the top unit with the four top brackets of the bottom unit;
then fit the top unit down onto the bottom unit.

1. Important safety information regarding the placement of this

device is provided on page iv. Please review it before
proceeding.

2. Make sure that power to all the devices you will be connecting

up have been turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.

cs91348.book Page 7 Thursday, May 3, 2007 2:28 PM

Advertising
This manual is related to the following products: