Port key in examples – ATEN CS9134 User Manual
Page 32
CS9134 / CS9138 User Manual
20
Port Key In Examples
1. To access a computer attached to port 3 of a Single Stage installation, after
invoking hotkey mode, key in 3 for the Port ID, as follows:
[Ctrl] [Shift] [Alt] 3 [Enter]
2. To access a computer attached to port 3 of a Second Stage unit that is
cascaded down from port 2 of the First Stage unit, after invoking hotkey
mode, key in 2 3 for the Port ID, as follows:
[Ctrl] [Shift] [Alt] 2 3 [Enter]
Note: You must key in the numbers one at a time.
3. To access a computer attached to port 1 of a Third Stage unit that is
cascaded down from port 4 of a Second Stage unit, which, in turn, is
cascaded down from port 2 of the First Stage unit, after invoking hotkey
mode, key in 2 4 1 for the Port ID, as follows:
[Ctrl] [Shift] [Alt] 2 4 1 [Enter]
cs91348.book Page 20 Thursday, May 3, 2007 2:28 PM