Acura 2010 RDX - Manual (Page 78)

The multi-information display in the
instrument panel displays various
information and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle more
comfortably.
Others help to keep you aware of the
periodic maintenance your vehicle
needs for continued trouble-free
driving.
When you open the driver's door, a
‘‘Welcome’’ message is shown on the
multi-information display. When you
turn the ignition switch from the ON
(II) position to the ACCESSORY (I)
position, a
‘‘Goodbye’’ message is
shown on the display.
To change the display, press the
SEL/RESET button or INFO ( / )
button on the steering wheel
repeatedly until the desired
information appears (see page
75 ).
You can also change the display by
pressing the select/reset knob in the
instrument panel.
When you turn the ignition switch to
the ON (II) position, your last
selection is displayed.
In the multi-information display, the
system message is also displayed
(see page
79 ) and you can customize
your vehicle control settings (see
page
82 ).
INFO BUTTONS
SEL/RESET
BUTTON
Multi-Information Display
74
09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu
2010 RDX