Using one-touch/two-touch speed dialing – Audiovox PM-8912 User Manual
Page 31
Using One-Touch/Two-Touch Speed Dialing
With this feature, you can dial Speed Dial entries using one key press
for locations 2-9 or two key presses for locations 10-20.
To use One-Touch Dialing for Speed Dial locations 2-9:
ᮣ
Press and hold the appropriate key for approximately two
seconds. (The display confirms that the number has been dialed
when it shows “Calling...”.)
To use Two-Touch Dialing for Speed Dial locations 10-20:
1.
Press the first digit.
2.
Press and hold the second digit for approximately two seconds.
(The display confirms that the number has been dialed when it
shows “Calling...”.)
Note:
Speed dialing is not available when you are roaming with Call Guard
enabled.
Tip:
is used for One-Touch voicemail dial feature.
To learn how to set a speed dial location, please see “Speed Dial
Numbers”on page 75.
Section 2A: Your Sprint PCS Vision Phone – The Basics
22
SPRINT_TX115C041021_A 2004.10.25 8:58 PM Page 22