PRG Mbox EXtreme - Manual (Page 20)

M BOX E XTREME ™ M EDIA S ERVER U SER M ANUAL
1 2 02.9800.0001
Setup
Unpack and Hookup Procedure
To set up case components:
Step 1. Remove front and back covers from case (
Figure 2-1 ).
Step 2. Remove keyboard and mouse from back of case.
Figure 2-1: Removing Covers and Components
Step 3. At rear of case, verify that Monitor/Dongle, Keyboard/Mouse, USB, Ethernet and Power
cables are connected to computer ( Figure 2-2 ).
Figure 2-2: Rear Cable Connections
Remove covers
1 2
Remove components
out
in
optical audio
Monitor/Dongle
Power
Ethernet
USB
Keyboard/Mouse
NOTE:
Also refer to Figure 1-2.