PRG Mbox EXtreme - Manual (Page 22)

M BOX E XTREME ™ M EDIA S ERVER U SER M ANUAL
1 4 02.9800.0001
System Connection Procedure
Once the case is set up and in place, connect to your control and video output devices.
To connect to the system:
Step 1. For DMX512 controllers:
a. At Data I/O unit, connect console or DMX512 controller to DMX connector as required.
Figure 2-4: Connecting DMX512 Control Devices
Step 2. For Art-Net consoles:
a. At Data I/O unit, connect console to any Ethernet connector ( Figure 2-4 ).
b. If desired, connect additional Ethernet devices (such as a media server, network switch
or dimmer rack) to additional Ethernet ports provided by the Ethernet Hub ( Figure 2-5 ).
Figure 2-5: Connecting Additional Devices to Ethernet Hub
DATA I/O
ETHERNET
DMX
ETHERNET HUB
HUB POWER