AAMP of America PXDP2 - Manual (Page 4)

2
1.3 Compatibility Notes
This section will inform you of the specific requirements for your factory
radio to be compatible with the iPod2car Gen2 oEM. these notes will in-
form you of any issues or circumstances that can affect the compatibility
of our product with your radio, audio system, or accessories. not all Fac-
tory radios are compatible with the iPod2car Gen2 oEM. the iPod2car
will only work on models equipped with the specifications listed below.
Please read and understand these notes before proceeding:
Radio Requirements
The operation of the iPod2car Gen2 OEM relies upon the radio’s ability
to display text, such as song title, playlist, or artist information from the
iPod. Most MP3 compatible radios are capable of displaying at least one
line of text information on the faceplate.
Ford
radios must be “can-bus”, satellite ready, or have “MP3” printed on
the faceplate of the radio. This indicates that the required connection is
present on the rear of the head unit and that the radio has the necessary
functionality to operate the iPod2car.
iPod2car interface Docking cable Radio specific harness
1.4 Configuration and Harness Selection
This section will instruct you on how to properly identify and/or confirm the
proper interface dip-switch configuration and harness selection for your
vehicles factory radio. On the following page you will find our Harness and
Dip-Switch Configuration Chart. This chart will inform you of the proper
harness and dip-switch configuration for your vehicle.
The iPod2car Gen2 kit that you purchased includes an iPod docking cable
and the interface. You should have also purchased one of the following
harnesses;
Ford - PXH2FD1
If you do not have one of these harnesses, your authorized Peripheral®
dealer will have the harness for you to purchase separately.