Using toolkit utilities, Using reboot, Reboot command-line syntax – HP ProLiant DL380 Server User Manual
Page 24: Reboot command-line arguments, Reboot return codes, Using toolkit utilities using reboot
Using toolkit utilities
The Toolkit utilities control the installation process, read the source server configuration, and
duplicate the configuration on a target server through a generated script file.
The Toolkit utilities include:
•
REBOOT
•
SETBOOTORDER (Limited functionality for HP ProLiant 100 series servers)
•
STATEMGR (Utility is not supported on 100 series servers)
•
RBSURESET
•
HPDISCOVERY
•
IFHW
•
HWQUERY
•
CONREP
•
HPRCU
•
HPACUSCRIPTING
•
HPLPCFG
•
LO100CFG (Utility only supports HP ProLiant 100 series servers)
•
HPQLAREP
•
HPONCFG (Not supported on HP ProLiant 100 series servers using the Oxx ROM family)
Using REBOOT
The REBOOT utility enables the user to reboot the server, controlling which device is the boot
device. In conjunction with other utilities, the REBOOT utility controls server reboots from a batch
file.
REBOOT command-line syntax
REBOOT [DRIVE:] [/?]
REBOOT command-line arguments
Description
Command line argument
Valid arguments that can be passed to REBOOT are A:,
C:, CD, RBSU, or PXE. By specifying an argument, the
[DRIVE:]
drive indicated is set to boot on the next reboot, and the
system is restarted. If no argument is provided, then the
system is set to boot using the defined boot order.
This argument performs a one-time cold boot of the system.
/cold
This argument displays help information.
/?
REBOOT return codes
There are no return codes for the REBOOT utility.
24
Toolkit utilities