Performing a health check – HP ProLiant BL465c Server Blade User Manual
Page 40
Advertising
To resolve these issues, you must use the VCSU to upgrade the firmware.
Performing a Health check
HP SUM 5.0 can deploy VC firmware, however, it is necessary to perform a health check before
updating with HP SUM.
NOTE:
Use VCSU instead of HP SUM in the following cases:
•
Updating enclosures that are not part of a domain
•
Unhealthy VC domains
•
If you need to specify activation order
1.
Download VCSU.
2.
Run VCSU with the "healthcheck" parameter.
For example:
vcsu -a healthcheck -i ACTIVE_ONBOARD_ADMINISTRATOR_IP -u USERNAME
-p PASSWORD
For more information, see the HP BladeSystem c-Class Virtual Connect Support Utility on the
HP website at:
40
Troubleshooting
Advertising
This manual is related to the following products: