Refreshing the data – HP ProLiant BL465c Server Blade User Manual
Page 37
Using the software 37
The Monitor Manager task is only visible in the Monitor Service State view until at least one enclosure is
registered.
After adding, removing or updating an enclosure, click Refresh from the Actions pane, or the Refresh icon
to update the monitor service tree-list in the left panel.
The Monitor Manager contains 3 panes:
•
Tree pane (left)—This pane can be collapsed and expanded. The pane contains a tree that shows all
connected Monitor Services and enclosures managed by the Monitor Service. The tree has a root
node of the HP BladeSystem Enclosure Monitor Manager. The second level lists all connected
Enclosure Monitor Services. The third level shows all the enclosures managed by the Enclosure
Monitor Service. The Tree pane also shows the status of the Monitor Service and the BladeSystem
enclosure monitoring status.
•
Detail pane (middle)—This pane's content changes according to the node selected from the Tree
pane.
•
Actions pane (right)—This pane can be collapsed and expanded. This pane's content changes
according to the node selected from the Tree pane.
Refreshing the data
To refresh the data shown in the Monitor Manager, click Refresh from the Actions pane or click the
Refresh icon. The Monitor Manager will query the Monitor Service for the latest information. A Refresh is
required to see the latest connection state.