Rack enclosure name changed, Enclosure removed – HP ProLiant BL465c Server Blade User Manual
Page 46
NT Event lists for HP BladeSystem Enclosure Monitor Service 46
Rack Name Changed.
This trap signifies that an agent or utility has changed the name of the rack. Each server blade in each
enclosure within the rack will be updated to reflect the new rack name. It can take several minutes for the
rack name change to be propagated throughout the entire rack.
User Action: None.
Source IP Address: '%1';
Source Name: '%2';
Rack Name: '%4';
Rack Unique ID: '%5';
Rack Serial Number '%6';
Trap Sequence Number '%7'
[SNMP TRAP: 22001 in CPQRACK.MIB]
<a href="https://%1/"">Onboard Administrator Web Console</a>
Rack enclosure name changed
NT Provider: Blade Enclosure
NT Event ID: 22002
NT Event Type: Informational
NT Event Message:
Rack Enclosure Name Changed.
This trap signifies that an agent or utility has changed the name of an enclosure within the rack. Each
component within the rack will be updated to reflect the new enclosure name. It can take several minutes
for the enclosure name change to be propagated throughout the entire enclosure.
User Action: None.
Source IP Address: '%1';
Source Name: '%2';
Rack Name: '%4';
Rack Unique ID: '%5';
Enclosure Name '%6';
Enclosure Serial Number '%7';
Enclosure Model '%8';
Trap Sequence Number '%9'
[SNMP TRAP: 22002 in CPQRACK.MIB]
<a href="https://%1/">Onboard Administrator Web Console</a>
Enclosure removed
NT Provider: Blade Enclosure