1 setting up raid, 1 raid definitions – Asus TS100-E7 User Manual

Page 86

Advertising
background image

5-2

Chapter 5: RAID configuration

5.1

Setting up RAID

The motherboard comes with the Intel

®

C202 southbridge controller that supports

the following SATA RAID solutions:

LSI MegaRAID software RAID Configuration Utility (default) with RAID 0,

RAID 1, and RAID 10 support (for both Linux and Windows OS).

Intel Rapid Storage Manager with RAID 0, RAID 1, RAID 10, and RAID 5

support (for Windows OS only).

5.1.1

RAID definitions

RAID 0

(Data striping)

optimizes two identical hard disk drives to read and write

data in parallel, interleaved stacks. Two hard disks perform the same work as a

single drive but at a sustained data transfer rate, double that of a single disk alone,

thus improving data access and storage. Use of two new identical hard disk drives

is required for this setup.
RAID 1

(Data mirroring)

copies and maintains an identical image of data from one

drive to a second drive. If one drive fails, the disk array management software

directs all applications to the surviving drive as it contains a complete copy of

the data in the other drive. This RAID configuration provides data protection and

increases fault tolerance to the entire system. Use two new drives or use an

existing drive and a new drive for this setup. The new drive must be of the same

size or larger than the existing drive.
RAID 10 is data striping and data mirroring combined without parity (redundancy

data) having to be calculated and written. With the RAID 10 configuration you get

all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk

drives or use an existing drive and three new drives for this setup.
RAID 5 stripes both data and parity information across three or more hard disk

drives. Among the advantages of RAID 5 configuration include better HDD

performance, fault tolerance, and higher storage capacity. The RAID 5 configuration

is best suited for transaction processing, relational database applications,

enterprise resource planning, and other business systems. Use a minimum of three

identical hard disk drives for this setup.

Advertising
This manual is related to the following products:

PI4