Spin speed, Rinse hold (stop-não esgota), Display – AEG LAVAMAT TRIATHLON 60820 User Manual

Page 13

Advertising
background image

By depressing at the same time buttons PRÉ-LAVAGEM and TRATAMEN-
TO DAS NÓDOAS the acoustic signal at the end of programme is switched
off.

SPIN SPEED

Press this button to reduce the maximum
speed of the final speed proposed by the
machine for the selected programme or to
select option STOP-NÃO ESGOTA (RINSE
HOLD).

RINSE HOLD (STOP-NÃO ESGOTA)

By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished, the
pilot light FIM (END) on the programme progress display illuminates to
indicate that the water must be emptied out.
To empty out water:

• press the START/PAUSE button: after emptying, the machine performs

the spin cycle required for the type of wash selected;

• select the DRAIN programme DESCARGA to empty out the water with-

out spinning.

Warning! The programme selector dial must be turned first to RESET

O

and then to the DRAIN programme.
If the water is not emptied out, the machine automatically empties
itself after 18 hours.

Display

The display shows the following information:

Duration of the selected programme (in minutes), calculated automat-

ically on the basis of the maximum recommended load for each type of
fabric.

• When the programme has finished, a steadily lit zero is displayed.

Delayed start, (19 hours max.) programmed using the special button.

The countdown is updated every hour.

Alarm code indicating a fault in the machine operation (see page 75).

57

Description of the appliance

1200

1000

900

700

STOP-NÃO

ESGOTA

400

850
700

600
400

STOP-NÃO

ESGOTA

132996510.qxd 11/07/01 15.30 Pagina 57 (Nero/Process Black pellicola)

Advertising