AEG LAVAMAT TRIATHLON 60820 - Manual (Page 42)

Permanent connection
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any point.
This operation must be performed by a qualified electrician.
Important: The power supply cable must be easily accessible after
installing the machine.
86
Installation
132996510.qxd 11/07/01 15.30 Pagina 86 (Nero/Process Black pellicola)