HP Integrity rx4640 Server - Manual (Page 31)

Deploying Integrity Support Packs in Microsoft Windows
Installing Single Components
In some instances, you might want to install a single component manually, rather than install
an entire Support Pack. To install a single component on your local system:
1. Double-click the component to be installed (cpxxxxxx.EXE). A screen similar to the
following appears.
Figure 2-10: Component installation
2. Click the Install button. A screen similar to the following appears.
Figure 2-11: Component installation confirmation
3. Click the Install button, then follow the instructions on the screen to complete
the installation.
HP Integrity Support Pack and Deployment Utilities User Guide 2-21