Anton/Bauer HyTRON 140 - Manual (Page 10)

The HyTRON features an all NEW “RealTime” LCD display
providing on-the-fly remaining run time estimates in 15 minute increments
as well as simultaneously providing remaining capacity information using
the traditional “Fuel Gauge” approach. No special adapters or set up is
required. RealTime automatically calculates the load and displays
capacity information and battery status at all times.
Special electronics protect the Ni-Mh in the HyTRON battery from
damage and to ensure safe operation. These electronics work in
conjunction with the Digital Battery electronics and will give the operator
additional indications in the RealTime display of the battery’s status as
outlined below.
8
“RES” Bar
Remaining Runtime
Hours Minutes
Fuel Gauge Bars Side Bars
“InterActive” Segment
“Service” Segment