Avocent Advanced Console Server ACS 6000 - Manual (Page 21)

Chapter 1: Introduction, Navigation and Commands 11
NOTE: You must log into the CLI as root to have full control over the local directory path. All normal FTP
commands apply.
scp
Perform a secure shell copy.
Syntax:
--:- units cli-> scp [[user@]host1:]file1 [...] [[user@]host2:]file2
set
Set a parameter.
Syntax:
--:- units cli-> set <Path> <Parameter>=<Value>
After a parameter has been changed using the set command, a pair of asterisks appear at the
beginning of the CLI prompt.
**:- units cli->
Save the change:
**:- units cli-> commit
-or-
Undo the change:
**:- units cli-> revert
NOTE: After a commit or revert command, the asterisks at the beginning of the CLI prompt are replaced by
hyphens. Asterisks will not appear after the execution of the set command if using wizard mode, which can be
recognized by a prompt that has a pound sign after the colon and the current directory in square brackets
(example, --:#- [hosts] cli->).
commit
Save settings.
Syntax:
**:- port_settings cli-> commit
revert
Undo a previous parameter setting.
Syntax:
**:- units cli-> revert