Repair san visibility, Wmi mapper dialog box – HP SAN User Manual
Page 10
NOTE:
•
To Upgrade to SAN Visibility , select Next in the Welcome to the InstallShield of the HP
Storage SAN Visibility dialog box.
•
SAN Visibility user must be installed with the administrator privileges.
•
Installing SAN Visibility installs WMI mapper internally.
4.
Review and accept the license agreement.
By default, the HP Storage SAN Visibility files and documentation are installed in the following
folder:
<Install_Dir>\Hewlett-Packard\HP SAN Visibility
A message is displayed on completion of the SAN Visibility software installation.
NOTE:
32-bit JRE, v1.5 or v1.6 is required to install HP Storage SAN Visibility.
5.
A dialog box is displayed if the default WMI Mapper port is busy as shown in
Figure 1 WMI Mapper dialog box
NOTE:
HP Storage SAN Visibility software, collects HOST HBA information using the WMI
classes. WMI HBA classes are not packaged along with the Windows 2003 OS base version.
The corresponding mof file must be installed manually. To execute this, download the latest
installer fcinfo.exe from the
, and complete the installation process. The
higher versions of Windows OS have the mof file installed by default.
Repair SAN Visibility
To repair HP Storage SAN Visibility software:
1.
Select Start > Settings > Control Panel > Add or Remove Programs.
10
Install, repair, and remove SAN Visibility