HP StorageWorks 2.32 Edge Switch - Manual (Page 159)

HA-Fabric Manager user guide 159
• Enable or disable the default zone (see ” Enabling and disabling the default zone ” on
page 164).
• Export a zone set (see ” Exporting a zone set ” on page 164).
• Import a zone set (see ” Importing a zone set ” on page 166).
NOTE: Only one appliance should perform discovery at a time, otherwise logon conflicts can
occur.
Displaying the zone library
To display the zone library:
1. Select Configure > Zoning.
The Zoning dialog box is displayed (
Figure 98 ).
Figure 98 Zoning dialog box
2. Select a fabric from the Fabric list.
This defines the fabric for the zoning actions.
3. Click the Zone Library tab.
The Zones, Zone Sets, and Potential Zone Members lists are displayed.