Port configuration – HP Deskjet 6127 Color Inkjet Printer User Manual
Page 7
network configuration page
10
. Total Packets Received:
Number of
error.
11
.
Number of
addressed to the printer.
12
.
Received:
Number of
devices on the network received.
13
. Bad Packets Received:
Number of
errors.
14
. Total Packets Transmitted:
sent without
error.
15
. Unicast Packets Transmitted:
addressed to a
specific device on the network
transmitted.
16
. Broadcast Packets
Transmitted: Number of
addressed to all devices on the
network transmitted.
17
. Transmission Error Packets:
not sent due to
errors.
port configuration
18
. Port Configuration: Type of ethernet port. This setting is determined by the network
to which the printer is connected and is not configurable from the printer.
●
10T FullDplx: Printer can simultaneously transmit and receive data (full duplex)
at 10
(megabits per second).
●
10T HalfDplx: Printer can transmit and receive data at 10
transmit or receive separately (half duplex).
●
100TX FullDplx: Printer can simultaneously transmit and receive data (full
●
100TX HalfDplx: Printer can transmit and receive data at 100
, but must
transmit or receive separately (half duplex).
file:///C|/enu/ug_ethernet_network_page_fs.html (4 of 4) [12/17/2002 1:00:30 PM]