Rmexch mount, Syntax, Description – HP 3PAR Application Software Suite for Microsoft Exchange Licenses User Manual
Page 62: Parameters, Examples
RMExch mount
SYNTAX
RMExch mount -mdb <mailbox_DB_name> -t <Timestamp> -h <Hostname> [-mp
“MountPoint”] | [-domain <DomainName>]
DESCRIPTION
The RMExch mount command mounts a virtual copy created by the RMExch create command.
When using the RMExch mount command to mount a virtual copy, the program will check to
see if the virtual copy is already mounted to a host machine. The virtual copy must have an
“Available” status, before it can be mounted
PARAMETERS
The following options are supported:
•
-mdb <mailbox_DB_name>
- The name of the mailbox database to mount.
•
-t <Timestamp>
- The timestamp of the virtual copy to mount.
•
-h <host>
- Windows host name to mount the virtual copy. The target host must have
Recovery Manager for Exchange installed.
If you are using a multiple domain configuration and the Windows host is not in the local
domain, use the -h option to specify the fully qualified domain name (FQDN) of the host’s
domain.
•
-mp "mountpoint"
- Optional. Enclose the mount point in quotation marks if you prefer
to mount the volume(s) elsewhere besides default directory. Full path is required. Default is to
mount to <System Drive>:\3parsnapshot.
•
-domain <DomainName>
- Optional. Specifies the domain to which the Exchange server
or mailbox belongs.
If this option is not specified, Recovery Manager for Exchange uses the local domain.
NOTE:
Use quotes ("") where spaces are included.
NOTE:
The <InServHost> is the host name defined in the system. Available host names defined
in the system can be listed by executing the HP 3PAR InForm CLI showhost command.
NOTE:
The -expose option was deprecated in release 3.1.1.
Examples
The following command will mount the virtual copy 020405162103 to the directory d:\Rmmount.
RMExch mount -mdb bottlenosed -t 020405162103 -h bottlenosed -mp
"d:\RMmount"
62
Using the Recovery Manager CLI