HP p1130 21 inch CRT Monitor - Manual (Page 14)

English English 13
HP 21” Color Monitor User’s Guide
Selecting the Input Signal
Selecting the Input Signal
You can connect two computers to this monitor using the video input
1
and video input 2 connectors. To select one of the two
computers:
1 Move the switch on the front of the monitor to either
1 or 2
2 The selected input (INPUT 1 or INPUT 2) appears on the screen
for 3 seconds.
NOTE If no signal is input to the selected connector, the message NO
SIGNAL appears on the screen. After a few seconds, the monitor
enters power saving mode. If this happens, switch to the other
connector.
Displaying the Current Input Signal
Pressing the button displays the horizontal and vertical
frequencies of the current input signal. If the signal matches one of
the monitor’s factory preset modes, the resolution is displayed.
P4819A_us.fm Page 13 Friday, September 21, 2001 4:00 AM