HP p1130 21 inch CRT Monitor - Manual (Page 27)

HP 21” Color Monitor User’s Guide
Additional settings (OPTION)
26 English English
Additional settings (OPTION)
You can manually degauss the monitor, change the menu position,
and lock the controls. To adjust one of the OPTION menu adjustment
items:
1 Press the button. The MENU appears on the screen.
2 Press the / buttons to highlight OPTION and
press the button again. The OPTION menu appears on the
screen.
3 Press the / buttons to select the desired
adjustment item. Adjust the selected item according to the
following instructions.
Degaussing the screen
The monitor is automatically degaussed when the power is turned
on.
Changing the menu position
Change the menu position if it is blocking an image on the screen.
To change the menu on-screen position:
Press the / buttons to select OSD POSITION for
horizontal adjustment, or OSD POSITION for vertical
adjustment. Then press the / buttons to shift the on-
screen menu.
Locking the controls
To protect adjustment data by locking the controls
Press the / buttons to select CONTROL LOCK
and press the button. Then press the / buttons
to select ON.
NOTE Only the POWER switch, MENU button, INPUT switch, and
CONTROL LOCK of the OPTION menu will operate. If any other items
are selected, the
mark appears on the screen.
To cancel the control lock
Repeat the procedure above and set CONTROL LOCK to OFF.
P4819A_us.fm Page 26 Friday, September 21, 2001 4:00 AM