HP Unified Extensible Firmware Interface - Manual (Page 58)

Figure 48 Server Availability — ASR Status screen
Setting ASR (Automatic Server Recovery) Timeout
If Automatic Server Recovery is enabled, this option lets you set the time to wait before rebooting
the server in the event of an operating system crash or server lockup. When the server has not
responded in the selected amount of time, the server automatically reboots.
To set ASR timeout:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Server Availability and select ASR Timeout and press Enter.
2. Select one of the following time increments:
•
5 minutes
•
10 minutes (default)
•
15 minutes
•
20 minutes
•
30 minutes
3. Press F10 to save your selection.
58 Accessing the System Configuration Menu