Saving configuration changes – HP Storage Mirroring V5 Software User Manual
Page 95
HP StorageWorks Storage Mirroring Application Manager user’s guide
85
•
TCP Port
—The TCP port to be used for communicating with the target web server.
•
Config Database Server
—Name of the Microsoft SQL Server that hosts the configuration database.
•
Config Database Name
—Name of the configuration database for the production SharePoint web front-end
server.
•
SharePoint Admin Name
—Account used to install and configure SharePoint on the production SharePoint
web front-end server. This should be entered as a fully-qualified domain name (
domain\username
).
•
SharePoint Admin Password
—Password for the SharePoint Admin account.
•
Confirm Password
—Re-enter the password to confirm.
When you have finished setting the configuration options, click
Connect Server
. When you select this button, the
SharePoint front-end web server specified in the
Server Name
field will be extended into the source SharePoint
configuration.
NOTE:
After you click the
Connect Server
button, it is recommended that you connect to both the source and
target front-end web servers using a browser.
The process of connecting a front-end web server to an existing SharePoint configuration can take several
minutes to complete. During this time, you will be able to perform other tasks within the Configure Protection
window; however, you will not be able to close the Configure Protection window until the task is complete.
You
must
manually install the Central Administration web application after the target has been extended in
order to be able to administrate SharePoint in the event of a failover.
Saving configuration changes
After you have changed the configuration parameters, click
OK
to apply the settings. If you click
Cancel
, any
changes you have made will be discarded and the previous configuration parameters will be used.
When you have finished configuring the optional protection options, continue with the next section, .
NOTE:
If you close the Storage Mirroring Application Manager prior to enabling protection, your changes
will not be saved. You
must
enable protection in order to save your configuration settings for a source/target
pair.