HP XP Performance Advisor Software - Manual (Page 42)

4. Click Remove License(s).
The Confirm Delete dialog box appears.
5. Click Yes.
The message indicating the removal of the license appears on top of the Remove License
dialog box.
Once the Meter based Term Licenses are removed, you cannot install it again on the same
management station. However, it can be installed on a different management station. The available
capacity will be same as the license capacity of the Meter based Term license key. When the
positive Meter based Term license units are removed from one management station and re-installed
on another, only the unused Meter based Term units are added.
Consider the following scenario where different TB-Days have been installed:
Table 4 Meter based Term licenses for P9500 array 53036
Target Management Station Source Management Station License Capacity
Only 10TB-Days are added 90TB-Days are consumed, then
remove the Meter based Term units 1TB, 100TB-days
If the 90TB-Days are consumed and if we remove the Meter based Term units and install it on a
different management station after the data is imported. Only 10TB-Days units Meter based Term
license will be added which was left during the removal of 100TB-Days units using Backup and
restore tool.
If the permanent license is removed, when the Meter based Term license has a positive count. It
will enter the grace period and Meter based Term license will not work.
42 Managing licenses for XP and P9000 disk arrays