About the ink cartridges, Check the ink cartridges status, Hp utility procedures – HP Designjet T1300 ePrinter User Manual

Page 134: Remove an ink cartridge

Advertising
background image

About the ink cartridges

Ink cartridges store the ink and are connected to the printheads, which distribute the ink on the paper.

To purchase additional cartridges, see

Accessories on page 141

.

CAUTION:

Observe precautions when handling ink cartridges because they are ESD-sensitive

devices (see the

Glossary on page 210

). Avoid touching pins, leads and circuitry.

Check the ink cartridges status

To view the ink levels of your ink cartridges, press

on the front panel, then

. There is a

Replace ink cartridges option on the ink information page in case you want to do so (see also

Remove an ink cartridge on page 126

).

To get more information on your ink cartridges, you can press the color of the cartridge on which you

want information.

You can also get this information from the HP Utility.

For an explanation of the ink cartridge status messages, see

Ink cartridge status messages

on page 183

.

HP Utility procedures

In the HP Utility for Windows, go to the Overview tab, each cartridge's status is under

Supplies Status > Cartridges.

In the HP Utility for Mac OS, select Printer Status in the Information group.

Remove an ink cartridge

There are two occasions when you need to remove an ink cartridge.

The ink cartridge is very low and you want to replace it with a full cartridge for unattended

printing (you can use up the remaining ink in the first cartridge at a more convenient time).

The ink cartridge is empty or faulty, and you must replace it to continue printing.

CAUTION:

Do not try to remove an ink cartridge while printing.

CAUTION:

Remove an ink cartridge only if you are ready to insert another one.

CAUTION:

Make sure the printer wheels are locked (the brake lever is pressed down) to prevent the

printer from moving.

NOTE:

When a cartridge runs out of ink, the current job is not automatically cancelled: unless you

cancel it manually, it will resume printing when the empty cartridge has been replaced. If there is a

delay in replacing the cartridge, you may see some banding on the print.

1.

From the front panel, press

, then

, then Replace ink cartridges.

Alternatively, press

, then

, then Ink > Replace ink cartridges.

126

Chapter 13 Handling ink cartridges and printheads

ENWW

Advertising
This manual is related to the following products: