Photographic paper, Black ink is easily removed when touched, The printer printed on the wrong paper type – HP Designjet T1300 ePrinter User Manual
Page 163: An “on hold for paper” message (t1300 series)
●
For heavyweight coated papers (< 200 g/m
2
), select paper type Bond and Coated Paper >
Heavyweight Coated Paper.
●
For cockle-free very thick coated papers (> 200 g/m
2
), select paper type Bond and Coated
Paper > Super Heavyweight Coated Paper.
Photographic paper
For photographic paper, select paper type Photo Paper > Photo Matte Paper.
Black ink is easily removed when touched
This happens when your paper is incompatible with matte black ink. To use non-matte black ink, select
paper type Photo Paper > Photo Gloss Paper.
After printing, the paper has wrinkles or there is too much ink
This happens when too much ink is used. To use less ink, select a thinner category. Matte paper
categories from thinnest to thickest are:
●
Plain Paper
●
Coated Paper
●
Heavyweight Coated Paper
●
Super Heavyweight Coated Paper
For other image quality problems, see
Troubleshooting print-quality issues on page 164
The printer printed on the wrong paper type
If the printer prints your job before you were able to load your desired paper, you may have Any
selected for the Paper Type in the printer driver. When Any is selected the printer will print
immediately on whichever paper is loaded. Load your desired paper, see
,
and select your paper type specifically in the driver.
●
In the Windows driver dialog: select the Paper/Quality tab, then select your paper type
from the Paper Type list.
●
In the Mac OS Print dialog (non-PostScript printers): select the Paper/Quality panel,
then select your paper type from the Paper Type list.
●
In the Mac OS PostScript Print dialog (PostScript printers): select the Paper/Quality
panel, then select your paper type from the Paper Type list.
NOTE:
Any is the driver default.
An “on hold for paper” message (T1300 series)
Based on a set of conditions that you can set when sending a job (see
), the printer will decide which of the loaded rolls of paper is more suitable to print the job.
If there is no roll of paper available that meets all the conditions, the printer will put the job on hold for
ENWW
The printer printed on the wrong paper type
155